A novel self activated K2XV2O7 (X = Mg and Zn) pyrovanadate green phosphor: Systematic characterization and time resolved photoluminescence

Novel self activated green phosphors; K₂ZnV₂O₇ (KZV) and K₂MgV₂O₇ (KMV) have been prepared and characterized in details. Both KZV and KMV were prepared by solid state reaction and systematically characterized by a number of techniques like X-ray diffraction (XRD), Fourier transformed Infrared (FTIR), Raman spectroscopy, Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), diffuse reflectance spectroscopy (DRS) and time resolved photoluminescence spectroscopy (TRPLS). XRD studies confirm tetragonal melilite type layered phase for both of them. The presence of pyrovanadate group in both is supported by FTIR and Raman spectroscopic investigations. Raman bands of KMV are blue shifted w.r.t to KZV which may be due to shorter bond lengths of MgO compared to ZnO and lower atomic weight of magnesium compared to zinc. DRS measurements indicated the optical band gap of KMV and KZV are 3.14 and 3.12 eV, respectively. Optical measurements on these samples show the emission of green color on ultra violet light irradiation. The origin of such emission is attributed to electronic transition (charge transfer) from filled 2p orbital of oxygen ion (O²⁻) to vacant 3d orbital of vanadium ion (V⁵⁺). In KZV there are dual emission band (PL1 and PL2) which are respectively attributed to ³T₂ → ¹A₁ and ³T₁ → ¹A₁transition, and the emission zone varies slightly compared to KMV. KZV emits bluish green (cool green) where KMV emits in yellowish green (warm green) region. This is indeed an important step towards realization of cost effective rare earth free luminescence material. It is also oberved that PL intensity of KZV is very high compared to KMV which is supported by the lifetime measurements.     

Evaporation in addition impression silicones

Summary The effect of weight loss on the dimensional stability of some addition-polysiloxanes used as impression materials in dentistry is studied. We show that polymerization is not the only factor affecting the shrinkage of these materials. An explanation for the time-dependent weight function is given.     

泡沫塑料吸附—石墨炉原子吸收光谱法测定地质物料中痕量铊

本文研制定了一种泡沫塑料吸附－石墨炉原子吸收光谱法测定地质物料中痕量铊的分析，在所先定的实验条件下，方法检出限为０．０５μｇ／ｇ、样准曲线范围为１０－３００ｎｇ／ｍＬ，Ｔｌ含量水平为０．７１μｇ／ｇ时的测定精度为６．０％，方法回收率９９．０％－１００．０％。经标样及大量样品分析验证，分析方法准确可靠。     

Synthesis of Heterocyclic Ring Systems for Heat-Resistant Plastics from Polyisocyanates

Investigations on space flight and rockets carried out in particular in the United States have aroused great interest in plastics with enhanced thermal stability. It has become possible to pass far beyond the expected limits of thermal stability with organic plastics, and to synthesize plastics and polymers that can be used at temperatures between about 200 and about 500 °C, a range that formerly appeared to be the exclusive province of inorganic materials.     

Mechanical Characterization of Angle-Ply Composite Laminates by Differential Moiré Method: The Influence of Specimens' Length-to-Width Ratio

The influence exerted by the specimen proportions on the measured performance of angle-ply [+45°/–45°]_s composite laminates is studied. Three kinds of specimens are considered, having different length-to-width ratios, made with glass/epoxy unidirectional or fabric laminae. The static tensile characteristics are measured by means of load cells, electric strain gauges and through the Moiré fringes method. The strain fields are analysed and the effects of stress concentration at the laminate-free edges are evaluated, as well as their influence on the strain distribution and the measured strength and stiffness. The results are summarized as diagrams of ultimate load and elastic modulus versus length-to-width ratio of the different specimens investigated. These diagrams allow the designer to evaluate the influence exerted by specimen proportions on the measured performance, as well as to compare characteristics which are heterogeneous, as obtained with different kinds of specimen.     

Nanoscopic scale studies of LiFePO4 as cathode material in lithium-ion batteries for HEV application

We present a review of the structural properties of LiFePO₄. Depending on the mode of preparation, different impurities can poison this material. These impurities are identified and a quantitative estimate of their concentrations is deduced from the combination of X-ray diffraction analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and magnetic measurements. An optimized preparation provides samples with carbon-coated particles free of any impurity phase, insuring structural stability and electrochemical performance that justify the use of this material as a cathode element a new generation of lithium secondary batteries.     

新型有机空穴传输材料氟代四苯基联苯二胺的合成与表征

设计和合成了一种新型的有机空穴传输材料N,N'-二苯基-N,N'-双(2-氟苯基)-[1.1'-联苯]-4,4'-二胺(FTPB),通过熔点测试、元素分析、FTIR光谱和1H NMR谱等手段对其分子结构进行了表征.采用循环伏安法(CV)结合UV-Vis吸收光谱测试了其能级结构.结果表明,其HOMO能级为-5.36eV,带隙为3.20eV,有望成为优良的空穴传输材料.     

On The Maximum Friction Law for Rigid/Plastic,Hardening Materials

For a rigid/plastic, hardening material model, it is shown that the velocity fields adjacent to surfaces of maximum friction must satisfy the sticking condition. This means that the stress boundary condition, the maximum friction law, may be replaced by the velocity boundary condition. Axisymmetric flows without rotation and planar flows are considered.     

The Chemistry of the Noncrystalline State

This article sets out to describe and account for the chemical and physical consequences of the presence of gross disorder in solids. Knowledge of the structure of such disordered materials is an obvious prerequisite to a further understanding of other properties and behavior, and our current knowledge of the structure of various noncrystalline systems is discussed together with the experimental techniques which need to be employed in order to obtain such information. The so-called glass transition, which takes place as a liquid is supercooled below the crystallization temperature, is discussed in terms of the various models which have been proposed to account for this phenomenon. The effect of noncrystallinity on electronic properties is also discussed, and we highlight new developments in the understanding of electron localization and transport processes. Finally, two applications of amorphous solids are considered in some detail: optical fibers for use in communication networks and “superionic” glasses for possible use in solid-state batteries.     

MATLAB语言在X射线衍射谱图处理中的应用

利用MATLAB语言编写了X射线衍射数据处理程序,使之能够导人到Materials Studio软件,进行粉末晶面指标化以及粉末精修等后续处理.处理程序简单易懂,可作为其他测试数据格式转换程序的参考.